79
Here are descriptions of every setup item:
Band (2):
Select the band you want to use; all the
wireless routers must use the same setting.
Channel
Select the channel you want to use (all the
Number (3):
wireless routers must use the same setting).
MAC address
Input the MAC address of the other wireless
1 to 4 (4-7):
routers.
Security
Click to set security settings for this connection
Setting (8):
(go to 2-7-3 Wireless Security for details).
2-7-1-5 Setup procedure for AP Bridge – WDS
In this mode, you can expand the scope of a network by combining
up to four other access points, and every access point can still
accept wireless clients.
2.4GHz AP Bridge (WDS) Settings
NOTE: For WDS mode, the output signal nature is the same as that of
normal AP mode.
1
2
3
4
5
6
7
8
