106
Here are descriptions of every setup item:
Enable Port
Check this box to enable port mapping;
Forwarding (1): uncheck this box to disable port mapping.
Private IP (2):
Input the IP address of the computer on the
local network that provides Internet service.
Computer Name Pull down the menu and all the computers
(3):
connected to the router will be listed here. You
can easily select the computer name without
checking the IP address of the computer.
Type (4):
Select the type of connection: TCP or UDP. If
you’re not sure, select “Both.”
Port Range (5): Input the starting port number in the left field,
and input the ending port number in the right
field. To redirect a single port number, just enter
the port number in the left field.
Comment (6):
Input any text to describe this mapping, up to 16
alphanumerical characters.
Add (7):
Add the mapping to the Port Forwarding table.
Reset (8):
Remove all inputted values.
Port Forwarding All existing port forwarding mappings will
Table (9):
be displayed here.
Delete (10):
Select a port forwarding mapping by checking
the “Select” box of the mappin option, then click
Delete Selected to remove the mapping. If
there’s no existing mapping, this option will be
grayed out.
Delete All (11):
Delete all mappings the in Virtual Server table.
