117
Reset (6):
Remove all inputted values.
Current MAC
All existing MAC addresses in the filtering table
Filtering Table (7): will be listed here.
Delete (8):
If you want to delete a specific MAC address
entry, check the “select” box of the MAC
address you want to delete, then click “Delete
Selected.” (You can select more than one MAC
address.)
Delete All (9):
If you want to delete all MAC addresses listed
here, click “Delete All.”
Reset (10):
You can also click “Reset” to unselect all MAC
addresses.
Enable IP
Check this box to enable IP address-based
Filtering (11): filtering, and select “Deny” or “Allow” to
determine the behavior of the IP filtering table.
If you select “Deny,” all IP addresses listed in
the filtering table will be prevented from
connecting to the network; if you select “Allow,”
only IP addresses listed in the filtering table will
be able to connect to the network, rejecting all
other network devices.
IP Filtering
All existing IP addresses in the filtering table will
Table (12):
be listed here.
Add PC (13):
Click to add a new IP address to the IP filtering
table. Up to 20 IP addresses can be added.
Refer to section 3-3-1-1 “Add PC” below.
Delete (14):
If you want to delete a specific IP address entry,
check the “Select” box of the IP address you
want to delete, then click “Delete Selected.”
(You can select more than one IP address.)
