112
Click Continue to go back to the previous setup menu or to
continue to other setup procedures; or click Apply to reboot the
router so the settings will take effect (wait about 40 seconds while
the router is rebooting).
If you decide to reset all the settings on this screen back to
previously saved values, click Cancel.
3-2-5 UPnP Setting
This function enables network auto-configuration for peer-to-peer
communications. Network devices will be able to communicate with
other devices directly and “learn” about other devices. Many
network devices and applications rely on the UPnP function.
Click NAT on the left side of the Web management interface, then
click UPnP; the following message will be displayed on your Web
browser:
There is only one option on this screen: Select “Enable” or
“Disable” to enable or disable UPnP function, then click Apply; the
following message will be displayed on your Web browser:
