71
f.
Universal Repeater
: The router can act as Station and AP at the
same time. It can use the Station function to connect to a Root AP
and use the AP function to service all wireless stations within its
coverage.
Select the mode you want to use from the Mode drop-down menu
(1) and continue to other specific settings:
Access Point
- go to section 2-7-1-1
Station-Infrastructure
- go to section 2-7-1-2
AP Bridge-Point to Point
- go to section 2-7-1-3
AP Bridge-Point to Multi-Point - go to section 2-7-1-4
AP Bridge-WDS
- go to section 2-7-1-5
Universal Repeater
- go to section 2-7-1-6
2-7-1-1 Setup procedure for Access Point:
Select the radio band you want to use from the Band drop-down
menu (2). One of the following messages will be displayed:
2.4GHz Access Point Settings
NOTE: For AP Bridge-Point to Point and AP Bridge-Point to
Multi-Point modes, the wireless router is operated in wireless bridge
dedicated mode – where the router is only used to expand the scope
of a network and no wireless clients will be accepted. If you want to
use your wireless router to expand the scope of a network and also
accept wireless clients, select AP Bridge-WDS or Universal Repeater
mode.
