Smoke extraction damper - SEDM-D
Page 32
Version 2023-06-07
TPM 155/22
Ordering key
SEDM-D 700x1100 .24C0H F / G1 / RAL 9010
design
size B (width) x H (height)
Damper design
Additional digit
Hand-operated rearming design with a magnet voltage of 24 V DC without end switches
.24C0H**
Hand-operated rearming design with a magnet voltage of 24 V DC and with two end switches
.24C2H
Hand-operated rearming design with a magnet voltage of 24 V DC and with two pairs of end switches
.24C4H
Hand-operated rearming design with a magnet voltage of 48 V DC without end switches
.48C0H**
Hand-operated rearming design with a magnet voltage of 48 V DC and with two end switches
.48C2H
Hand-operated rearming design with a magnet voltage of 48 V DC and with two pairs of end switches
.48C4H
Electric motor rearming design with a magnet voltage of 24 V DC without end switches
.24C0M**
Electric motor rearming design with a magnet voltage of 24 V DC and with two end switches
.24C2M
Electric motor rearming design with a magnet voltage of 24 V DC and with two pairs of end switches
.24C4M
Electric motor rearming design with a magnet voltage of 48 V DC without end switches
.48C0M**
Electric motor rearming design with a magnet voltage of 48 V DC and with two end switches
.48C2M
Electric motor rearming design with a magnet voltage of 48 V DC and with two pairs of end switches
.48C4M
—
- without installation frame
F
- with installation frame
G1
- simple grille with punched profiles
G2
- design grille with aerodynamic profiles
G3
- design grille with thin louvers with
hidden bolts
G4
- design grille from drawn steel
—
- without paint - for grille G1 only
*
grille colour*
*
Grille G1 is not powder painted as standard. Can be powder painted, if specified in the ordering key.
Grilles G2, G3, G4 are powder painted. If no colour is specified in the ordering key, the colour will be RAL 9010.
** This design is not in accordance with NF 61.937-1, and not in accordance with NF 61.937-10
Smoke extraction dampers SEDM-D
