www.mc-techgroup.com
MP48-R | 1.00.00
33
16.3.4 ASSEMBLING THE PUMP HEAD
1. Place the pump head on the housing according to the felt-tip mark.
2. Screw in the screws (Figure 11/5) and tighten them lightly crosswise.
3. Check the smooth running of the pump by turning the counterweight.
4. Tighten the screws (Figure 11/5) crosswise (tightening torque: 450 Ncm).
5. Put on the housing cover (Figure 13/1) and tighten it with the four Allen screws (Figure 13/2)
(tightening torque: 15 Ncm).
16.3.5 FINAL STEPS
1. Reconnect suction and pressure line to the pump.
2. Reconnect the pump to the electricity supply.
Note
If you have any questions about servicing call our technical adviser.
You will find the contact information on www.mc-techgroup.com.
