24
MP48-R | 1.00.00
www.mc-techgroup.com
Connect the optionally available tube fittings as follows:
1. Loosen the union nut of the compression fitting by turning it counterclockwise, carefully remove
the nut from the fitting body. Be careful not to lose the compression ring that is loose in the nut.
2. Slide the union nut over the connecting tube.
3. Slide the clamping ring, with the thicker bead facing the nut, onto the connecting tube.
4. Push the tube onto the support nipple in the fitting body; tighten the union nut hand-tight.
The tube is now mounted in a non-slip and pressure-tight manner.
Connection fittings for DN 4/6 or DN 6/8 are optionally available at M&C.
