20
MP48-R | 1.00.00
www.mc-techgroup.com
Figure 7
Mounting positions of the compressor housing
5. Reinsert and tighten the four motor mounting screws (Figure 6/4) (tightening torque: 6 Nm).
6. Replace the housing cover (Figure 6/1) and tighten with the four Allen screws (Figure 6/2) (tight-
ening torque: 15 Ncm).
ELECTRICAL CONNECTION
During electrical installation work, the relevant safety regulations must be observed. Before connecting
the pump, ensure that the electrical supply is de-energized.
Danger
Extreme danger from electrical shock
Only have the pump connected by an authorized specialist.
Only have the pump connected when the power supply is discon-
nected.
