Programming Mode
0
#
0
4
0
1
0
“Zone Naming” will be displayed. then the user is prompted to
enter a zone to name.
The user must enter the zone number,
between 1 and 8 in this unit.
If the user enters an invalid Zone, it will be ignored.
Once the user enters the name the user then enters the hash key
saving that name. When the alarm goes off, instead of the zone
number the zone name will be displayed. Note The Zone number
will flash bellow as well.
Save Changes
Enter Zones
(1-8)
The user must now enter the zone name with the keypad operating
as a telephone keypad. the user is allowed a maximum of
16
characters per zone
.
The Key ‘B’ represents a backspace or
delete.
B
Back space
The user is now prompted to enter a zone or Press hash to exit. if
the user wishes to name another zone the user keys in the zone
number or hash to exit.
Continue with zone ‘Z’
keyed in
Naming of Zones
Z
#
2
ABC
Exit
#
Z
0
#
0
A
0
1
0
Setting Level
The user must key in the user code followed by ‘0' then the level A,
B, C or D. the user must select active zones (
zones 1 to 8
).
Once the user enters the active Zones associated with that level
the user then enters the hash key saving the Zones to that level.
Save Changes
#
0
B
/
/
0
C
0
D
/
If the user enters an invalid Zone, it will be ignored.
The active zones on the level will be displayed, inactive zones will
be displayed as a blank.
1, ,3, , ,6, ,8
Edit Level - A
0
#
1
1
0
1
0
Changing User Code
“
Change User Code
” will be displayed. the user is then prompted
to enter new Code. The user must enter the new Code.
If the user enters an invalid code or times out, “ERROR” will
be displayed and no changes will be made.
Once the user enters the hash key the user is then prompted to re-
enter the new user code.
0
0
1 0
Save Changes
#
#
Once the user enters the code the user then enters the hash key
saving the new user code.
0
0
1 0
NOTE: The default user code is 1000.
X00370 home_guard.CDR
- 6 -
0
#
0
5
0
1
0
Transmitter Code
Enter the Transmitter code in decimal format. This code will be
transmitted on trigger. To send a test code press the 4 and 6 button
Once the user enters the code the user then enters the hash key
saving the code.
Save Changes
#
3
4
1 2
