-7-
Programming Mode
0
#
1
A
0
1
0
Self-learning Detectors
“ADD Device” will be displayed. The user is asked to trigger the
device, the user must force the device to trigger.
If the panel received the code the user will be asked to enter the
Zone. The panel will allocate the device to this Zone
If the code has already been added, or exists in the system the
unit will ask the user if it must add the device. The user can
press star
”*”
to continue or hash
”#”
to exit.
Z
Enter Zones
(1-8)
EXIT
#
Continue
*
The user is then prompted to add another device in which the user
has to follow the same procedure again. the user can press star
“*”
to continue and hash
“#”
to save and Exit
0
#
1
B
0
1
0
Self-learning Remote Controls
“ADD Remote” will be displayed. The user is prompted to trigger
the remote, the user must press any button on the remote.
If the panel received the code the user will be prompted that the
remote is added.
The user is then prompted to add another remote in which the user
has to follow the same procedure again. The user can press star
“*”
to continue and hash
”#”
to save and Exit
Remote Added
Trigger Remote
Trigger Device
X00370 home_guard.CDR
EXIT
#
*
Continue
EXIT
#
Continue
*
NOTE: THIS OPERATION WILL ERASE
ALL PRESENT DETECTORS ALLOCATED TO
THE ZONE CHOSEN.
!
0
#
2
1
0
1
0
Clearing Devices in a Zone
The user is prompted to enter the Zone to clear devices. Only the
Zone entered will be cleared. Note. only one zone at a time may be
erased
If the user wishes to exit, the user simply pushes the hash key instead.
The user is then prompted that the zone has been cleared and the
operation is complete.
Z
Enter Zones
(1-8)
EXIT
#
