-9-
ARMING THE HOME-GUARD
The Arm mode is when the unit becomes active in monitoring alarms. The unit can be armed in any of the
following ways:
- Remote Arm- In this mode the unit Arms to level A only.
- Schedule Arm when the unit reaches the scheduled time it will arm automatically. Arms to Level A only.
- Keypad Arm The user can choose to Arm at a particular level by holding down any of keys A - D.
To Arm Level A The User simply Holds down Key A until the Beep.
The siren should sound once if the Aux Siren option is selected.
A
The Level Armed and the Armed Mask will be shown.
1,X,3,X,X,6,X,8
ARMED LEVEL - A
ALARMS ON THE UNIT
Alarms on the unit will occur when any of the 8 zones are triggered, the panic on the remote was triggered or the panic
on the keypad was triggered.
When the unit goes into alarm, the unit will beep continuously and the siren relay will activate. The siren relay stays
activated for the duration chosen by the user; under programming options- siren duration. Default is 2 minutes. The
buzzer however continues to sound until the user disarms the system. The LCD will display the name of the alarm Zone
that went off and the zone in the level displayed will blink Example zone 3 is named lounge. Lounge will be displayed
and zone 3 of the level will blink.
If the Zone was not named the zone number will be displayed.
1,X,3,X,X,6,X,8
LOUNGE
Blinking
1,X,3,X,X,6,X,8
ALARM ZONE-3
Blinking
PANIC ACTIVATION
When the unit goes in panic the system goes into alarm and the siren,
together with the buzzer is activated. The display will show PANIC!!!.
PANIC!!!
To deactivate a panic the user must disarm the system.
ARM/DISARM
PANIC ACTIVATION
With the two channel Remote the panic is activated by pressing
button 1 as described in the figure.
On the Keypad the user can activate a panic by holding down the hash
“#” and star “*” key together.
*
#
+
To Arm via the Remote the user presses the Arm/Disarm button,
button 2 on the Remote.
ARM/DISARM
PANIC ACTIVATION
X00370 home_guard.CDR
2
1
1
2
