Mami Home Guard, User Manual

Page: 7 / 17

FACTORY DEFAULT
"USER CODE"
= 1 0 0 0
0 # 0 1 0
0 # 0
1
0 1 0
Setting Schedules ARM & DISARM
PROGRAMMING THE HOME GUARD
- 4 -
SYSTEM PROGRAMMING OPTIONS
The programming mode is where the users set certain OPTIONS, adjusting the
operation of the unit to suit their needs.
The unit will enter the programming mode
once the user ENTERS the user password followed by a hash “#” Key.
“Programming Mode” will be displayed on the LCD display. Once in programming
mode the user can adjust certain features of the unit as required by the user.
THE HOME GUARD IS ORIGINALLY PROGRAMMED WITH A "FACTORY
DEFAULT" SET OF OPTIONS. ALTHOUGH THE "FACTORY" OPTIONS
REFLECT THE CHOICE OF THE MAJORITY OF INSTALLERS AND END-
USERS, PROPER OPERATION AND COMPLIANCE WITH SPECIFIC
REQUIREMENTS CAN BE ACHIEVED THROUGH RE-PROGRAMMING.
“ ” will be displayed. Indicating that the
time for schedule 1 ARM must be entered. The user must enter the
time in a 24 hour format with hour first followed by the minute.
.
SCHEDULE 1 ARM time
If The user wishes to disable a schedule, instead of entering the
time; the ‘D’ KEY must be pressed
If the user enters an invalid time, “ERROR” will be displayed
and no changes will be made.
Once the user enters the time the user then enters the hash key
saving the time corresponding to the time the unit will automatically
arm.
“ SCHEDULE 1 DISARM time ” will be displayed. Indicating that the
time for schedule 1 DISARM must be entered.
Once the user enters the time the user then enters the hash key
saving the time corresponding to the time the unit will automatically
Disarm.
The user simply follows this same procedure for schedule 2
M M H H
D
Schedule Disable
Apply Changes
#
Save Changes
#
X00370 home_guard.CDR
M
M H H
0 # B B 0 1 0 Schedule Day Bypass
“ Schedule Bypass ” will be displayed. the user is prompted to
enter 1 for schedule bypass to be active or 0 to deactivate
schedule bypass.
Once the user enters the code the user then enters the hash key
saving the new user code.
1
BYPASS ON
0
BYPASS OFF
Save Changes
#
NOTE: The Schedule bypass option only bypasses the
Schedule for 1 day, to disable the schedule follow instructions
under setting schedules.