Programming Options
- 5 -
X00370 home_guard.CDR
0
#
0
2
0
1
0
Auxiliary options
“Sound Options” will be displayed. If the user wishes, the user could adjust any one of the following by
entering the corresponding keys:
0
#
0
2
0
1
0
Adjust Siren Duration
A
“Siren Duration” will be displayed. The user will have to select
between three options, either 30 second, 1 minute or 3 minute
interval.
Once the user is done the user will press the hash “#” key to
save the settings. The number pressed will be displayed.
3
2
1
Siren Duration 30 Seconds
Siren Duration 1 Minute
Siren Duration 3 Minutes
Save Changes
#
Auxiliary Buzzer
0
#
0
2
0
1
0
B
“Aux Buzzer” will be displayed. The user may then enter 1 or 0
to toggle the buzzer on or off respectively.
1
0
AUX BUZZER ON
AUX BUZZER OFF
Save Changes
#
Once the user is done the user will press the hash “#” key to
save the settings.
0
#
0
2
0
1
0
Auxiliary Siren Signals
C
“Aux Siren” will be displayed. The user may then enter 1 or 0 to
toggle the Aux Siren ON or OFF respectively.
Note this will disable the siren Arm and Disarm signals.
1
0
AUX SIREN ON
AUX SIREN OFF
Save Changes
#
Once the user is done the user will press the hash “#” key to
save the settings.
0
#
0
3
0
1
0
Setting System Time
“
” will be displayed. Indicating that the current time must
be entered.
The user must enter the time in a 24 hour format
with hour first followed by the minute.
Set Time
If the user enters an invalid time, “ERROR” will be displayed
and no changes will be made.
Once the user enters the time the user then enters the hash key
saving the time.
M
M
H H
Save Changes
#
0
#
0
2
0
1
0
Alarm Output Interface
D
“Output Interface” will be displayed. If the board is fitted with a
transmitter select either Siren Transmitter output (When using a
Ghatto receiver connected to a siren) or tracer interface when
using the home guard as a tracer interface.
1
0
Siren Transmitter Enabled
Relay Enabled
Save Changes
#
Once the user is done the user will press the hash “#” key to
save the settings.
2
Tracer Interface Enabled
NOTE: THE UNIT COULD BE FITTED WITH EITHER A RELAY OR A
TRANSMITTER THE USER WILL HAVE TO SELECT THE CORRECT
OPTION ACCORDING TO THE UNIT TYPE
