-8-
Programming Options
0
#
2
2
0
1
0
Clearing Remote Controls
The user is prompted to clear the remote’s. To continue the user
pushes any key.
If the user wishes to exit, the user simply pushes the hash
“#”
key
instead.
The user is then prompted that the Remote Controls has been
cleared.
Z
Enter Any Key Not Hash to
continue
EXIT
#
NOTE: THIS OPERATION WILL ERASE
ALL PRESENTLY STORED REMOTE
CONTROLS ALLOCATED TO THE UNIT.
!
0
#
2
9
0
1
0
Defaulting The Entire System
The user is asked to Reset to factory settings. To continue the user
pushes any key other than the Hash “#” key.
If the user wishes to exit, the user simply pushes the hash key
instead.
The user is then prompted that the System has been Reset to
default settings.
Z
Enter Any Key Not Hash to
continue
EXIT
#
NOTE: THIS OPERATION WILL ERASE
ALL PRESENT SETTINGS TO DEFAULT. ALL
ALLOCATED DEVICES AND REMOTE’S WILL
BE CLEARED AS WELL.
!
Notes:
X00370 home_guard.CDR
WARNING MODE ON THE HOME-GUARD
The Home Guard 64 can be put into a WARN or Chime mode. In
this mode the unit will not trigger an alarm but sound a chime when
any detector in the level has been triggered. To set warn Level (A-
D) The User simply
Holds down desired Key (A-D) and the star
key for approx 2 seconds until the Beep.
The Level in warn mode and the Armed Zones will be shown.
Zones Not in the arm level will be displayed as an X
1•X 3 X X 6 X 8
• •
•
• •
•
Warning LEVEL - A
*
A
+
