DISARMING THE HOME-GUARD
If the unit is armed, the unit can be disarmed in any of the following ways:
- Remote Disarm.
- Schedule Disarm when the unit reaches the scheduled time it will disarm automatically.
- Keypad Disarm.
To disarm the unit via the keypad the user enters the user code
followed by hash and hash, as can be seen below.
Disarmed!!!
To Disarm via the Remote the user presses the Arm/Disarm button,
button 2 on the remote.
ARM/DISARM
PANIC ACTIVATION
0
0
1 0
#
#
If the unit is successfully Disarmed, the unit will display Disarmed
and Beep twice, and the siren should beep twice if the Aux siren
option is selected.
If the wrong code is entered, the user is allowed three tries to
disarm the unit. Each try will be displayed on the LCD display.
After the third wrong entry, the unit will go into alarm.
Try -3
Counts down to 0
ALERTS ON THE UNIT
In the case that any of the sensors added to the system has a
battery low condition the sensor will transmit that condition to
the unit. The unit will light up the Trouble LED. The user may
push the star key and hold it down until the battery low zone is
displayed (either the zone name or the zone number). the user
wont be notified which sensor it is but will only be notified which
zone the sensor is in.
Battery Low
Lounge
BATTERY LOW ON SENSORS ALERT.
Battery Low
Zone - 5
In the case that any of the senors added to the system has a
Tamper condition the sensor will transmit that condition to the
unit. The unit will light up the Trouble LED, Tamper and the
zone will be displayed
and the alarm will be sound. The user may push the
star key and hold it down the tamper alarm will be cleared. The
user wont be notified which sensor it is, but will only be notified
which zone the sensor is in.
(either the zone name or the zone
number)
TAMPER!!!
Lounge
TAMPER ON SENSORS ALERT.
TAMPER!!!
Zone - 5
Clear Alerts:
The user simply pushes the star key and hold it, then the alerts
will be cleared.
*
Notes:
-10-
X00370 home_guard.CDR
1
2
