Malvern Instruments Spraytec, User Manual

Page: 183 / 221

able for disposal of chemical wastes in the area of use. Refer to the
Materials Safety Data Sheets.
Moving the system
If it is necessary to move the system, follow these guidelines. Appendix E has full
information on the procedure.
#
Warning!
.
Power off all components and disconnect the cables to any accessories be-
fore attempting to move the system.
.
The system can be moved short distances with the Transmitter and Re-
ceiver modules fitted to the X-bar.
.
If the system is to be moved large distances, we recommend repacking it in
its original packaging.
Disposing of the instrument and accessories
When it is eventually time to dispose of the system, do this in a responsible
manner. The following guidelines should be followed:
.
Seek advice from the local Malvern Instruments representative for details.
.
Decontaminate the instrument if hazardous materials have been used in it.
.
Refer to any local regulations on disposal of equipment.
A P P E N D I X A
S p r a y t e c
P a g e A . 5
Use proper lifting techniques and at least two people to avoid back
injury. One person must support each module on the X-bar. Always lift
the instrument by holding it under its base.
Never lift an instrument by precision parts such as the lens, or by its
covers.