Malaguti SPIDER MAX GT 500, Service Manual

Page: 85 / 104

85 07/06
SPIDER MAX 500 - EURO 3
F. 2
F. 5
F
DASHBOARD
• To remove the dashboard, please refer: S/D - P. 26.
BULB CHANGE
The burnt out bulbs always have to be replaced
with new ones, with the same specifications.
PARKING LIGHT
• To access the bulb of the parking light, remove the central
fairing: S/D - P. 24.
FRONT DIRECTION INDICATORS
• The bulb holders of the front direction indicators are in-
tegrated in the front headlights.
• To access the bulbs of the front direction indicators, re-
move the inserted side covers (A).
C
B
DIRECTION INDICATORS AND TAIL LIGHTS
• Lift the seat.
• Removing the inserted side covers (B), allows reaching
the rear direction indicator bulbs.
• Removing the inserted rear covers (C), allows reaching
the tail light bulbs.
FRONT HEADLIGHTS (ACCESS)
• To access the front headlight bulbs, remove the central
fairing: S/D - P. 24.
While fitting the new bulb, having the same
specifications as the burnt out one, take care
not to touch the glass with fingers.
FRONT HEADLIGHTS
• To remove the front headlights, first remove the front fairing (S/D - P. 27).
NOTE - The front fairing is made up of two parts. In order to operate only on one headlight, divide and remove the
concerned part, after disconnecting the wiring connector.
The front headlight glass cannot be replaced. If the glass is broken, replace the whole headlight.
A
F. 4