39
Adjustment of IRON Mode:
“SETUP” button is pressed for
switching the level of IRON mode of
the device on and off in whatever
mode is it in.
The current IRON mode is displayed as open or closed.
You may find more detailed information about the properties of this mode
and how it is used in following sections.
Using the RESET Button:
When the device is in use some
interference may occur due to the
environment or unbalanced detector
head movement. These interferences
start to show on the screen and cause
the device to give a sound alarm.
Resetting can be done by pressing the
“RESET” button on the system box. By
resetting the effects of interference are
eliminated. Resetting should not be done when the detector head is over
the target! This will cause loss of depth, misinterpretation of received
signal and the target become invisible to the device.
Resetting
procedure is carried out after the detector head is removed away
from the target.
Summary of Contents for JEOHUNTER 3D Dual System
