27
If the ground effect on the device is eliminated by this procedure
none of “Void and Mineral” lights turn on (Metal and Mineral lights should
also not turn on). This means the device is suitable for exploring in that
area.
If ground effect continues the device will keep turning on “Void and
Mineral” lights and sound alarm.
In this case lift the detector head of the device 40 cm above ground
again and press “ ” button a couple of times, perform resetting. Lower
the detector head again to the ground to the same distance. If the lights
are on and sound alarm continues (after each operation the number of
lights will decrease) continue this operation until the effect is eliminated.
Reset
Summary of Contents for JEOHUNTER 3D Dual System
