12
5-
DEPTH:
The key that enables the device to switch to diameter screen
and carry out depth analysis.
6- RECORD:
The key that enables entry to recording screen in
addition to recording the report in report analysis section.
7-
“ – “ :
The minus key.
8-
RESET:
Resets all detector settings (Default Settings) in reference to
recent settings whenever resetting is done.
9 -
“+”:
The plus key.
10 – SOUND:
The key that is used to make sound settings in the system.
11 – LIGHT:
The key used for adjusting illumination level in LED system.
12 – SENSITIVITY:
The mode that is used in LED system to make
sensitivity settings.
13 – GROUND:
The transition key to switch to the necessary mode to be
able to make ground setting.
14
The LED that indicates it is in one of Sound, LED, Sensitivity, Ground
modes and this mode has to be changed in order to start exploring.
15 –
LEDs that indicate Sensitivity Level in LED mode.
16 -
LEDs that indicate battery charge level in LED mode.
17 –
COMMUTATOR:
The commutator that is used for selecting
between device turn off and system selection.
18 –
LCD:
The section that presents data to the operator in LCD system.
Summary of Contents for JEOHUNTER 3D Dual System
