Page
30
of
36
7.3. Starting and pausing the washing program.
By pressing the program start button marked with the symbol [5], the previously set or
programmed program is executed.
The display shows the time to complete the washing process (instead of the current time).
The displayed time does not take into account the time needed to pour water. In the MCH-07T
version, depending on the settings made, the display may show the current temperature (instead
of time). This function can only be assigned to one or more steps, and in the remaining steps the
time to finish the washing process can still be displayed.
Starting the washing process is also signaled by the blue diode, illuminating the symbol .
During the program implementation, user can pause it at any time by pressing the button again.
If the program is stopped, all active relays will be switched off, and the PPPP symbol and the time
remaining until the end of the program are displayed alternately. The program is resumed by
pressing the button again. The program will be continued from this step (sequence), in which
pausing occurred.
