Page
24
of
36
6.6. Table of setting for the washing segment.
In the table of settings, all available parameters (functions) are given along with their description
and possible values to be set. If it is necessary to change any parameter, enter the setting mode and
then select the parameter that will be subject to change.
description of function
symbol
range of settings
factory
setting
entry in the setting mode
U000
access code
121
edition of programs
EdPr
edition of factory programs and
creation of own programs
8 programs
setting of manual activation
of the vacuum pump
or stirrer (when the washing
program is disabled)
UPP
0 – inactive
1 – active; no time limit
2 – active; with a time limit set in
UPt)
1
time limit for manual
activation of the vacuum
pump or stirrer
(when the washing program
is disabled)
UPt
setting the time limit from 00.01
min. to 99.59 min.
01.00
(min.)
setting the maximum power
supply decay time,
after which the program will
be resumed
UAP
0 – no time limit; the program will be
always resumed after the power
supply is restored
1 – time limit; the program will only
be resumed if the power supply is
restored during the set time (by
default within 9 hours)
9 (h)
setting the clock function
CL0
0 – inactive
1 – activation of relay 6 or relay 7,
depending on the time of day;
disables the possibility of setting
the program manually
2 – switching the active washing
program, depending on the time
of the day; disables the possibility
of setting the program manually
0
setting the limit hour
between “morning” and
“afternoon”
CL5
setting a hour delimiting “morning”
from “afternoon”
setting the program active
in the “morning”
(only if CL0=2)
PA
number of program (1-8)
1
setting the program active
in the “afternoon”
(only if CL0=2)
Pb
number of program (1-8)
1
correction of the
temperature sensor scaling
(MCH-07T version only)
oFF
correction of the current
temperature indi/- 10
O
C,
every 0.5
O
C
no
correction
