Page
28
of
36
The editing of the controller program in the MCH-07T version is similar to the basic version, with the
addition of editing and settings related to temperature.
6.9. Return to factory settings.
To return to the default settings, enter the controller settings mode. Using the
▲
and
▼
buttons
select the Pd0d parameter, confirm the selection by pressing the S button and change the value
of this parameter from 0 to 1, using the
▲
button. Then confirm the changes by pressing the S
button again. After doing this, disconnect the power supply from the controller and switch it on
again.
ATTENTION
Return to the factory settings removes any settings from the controller's memory, while restoring
factory settings. So use this option with caution and consciously.
The return to the factory settings takes place only after disconnecting and re-connecting
the controller's power supply.
