P 6/ 13
R
epair
[3] DISASSEMBLY/ASSEEMBLY
(3) Assemble Fan 110 to the rotor shaft. (
Fig. 9
)
Fig. 9
[3] -1. Fan 110, Rotor (cont.)
ASSEMBLING
Motor housing
Cap
Flat washer 8
Rotor
1. Fix Cap to Motor housing with four 3x20
Tapping screws.
2. Assemble Fan 110 to the rotor shaft while
aligning their flats on Fan110 and the rotor shaft.
3. Using an awl or a small screwdriver as a guide
rail, assemble Flat washer 5 to the rotor shaft.
2. Assemble Flat washer 8 to
the rotor shaft.
Socket bit 8-55
Rubber ring 8
Housing set L
4. Lock Fan 110 with the grip
of plastic hammer.
5. Attach M5 Coned disc spring
hex nut to Socket bit 8-55, and
tighten M5 Coned disc spring
hex nut by turning it clockwise.
6. Rubber ring 8 must be mounted to
Motor housing as shown in the figure
on the left. Otherwise, Motor housing
can not be properly mounted to
Housing set L.
Fan 110
Fan 110
Flat
Rotor shaft
Awl or small
screwdriver
Flat washer 5
M5 Coned disc spring hex nut
Summary of Contents for XBU02
Page 1: ...REPAIR MANUAL XBU02...
