R
epair
CAUTION: Repair the machine in accordance with "Instruction manual" or "Safety instructions".
[1] NECESSARY REPAIRING TOOLS
[2] LUBRICATION
Code No.
Description
Use for
1R028
Bearing setting pipe 20-12.2
press-fitting Motor housing cover to Rotor
1R032
Bearing setting plate 8.2
holding Rotor when press fitting Motor housing cover
1R045
Gear extractor (large)
removing Fan 110, Rotor
1R247
Round bar for arbor 20-100
press-fitting Rotor and Motor housing cover
1R269
Bearing extractor
removing Ball bearing 626DDW, 698LLU from Rotor
No need to lubricate.
R
epair
[3] DISASSEMBLY/ASSEEMBLY
(1) Remove Front nozzle, Rear cover and Housing set R. (
Fig. 1
)
Fig. 1
4x18 Tapping screw
1. Remove four 4x18 Tapping
screws and separate Rear cover.
2. Remove Rear cover by prying it off
with a slotted screwdriver.
[3] -1. Fan 110, Rotor
DISASSEMBLING
Rear cover
Rear cover
3. Remove twelve 4x18 Tapping screws.
5. Remove two 4x18 Tapping screws.
6. Remove Front nozzle.
4. Separate Housing set R.
Housing set R.
Front nozzle
P 2/ 13
Summary of Contents for XBU02
Page 1: ...REPAIR MANUAL XBU02...
