![background image](http://html1.mh-extra.com/html/makita/vr001c/vr001c_instruction-manual_3978218014.webp)
14
ENGLISH
Operation
Symptom 1
Symptom 2
Cause
Remedy
Vibrator does not
start
The LED lamp on the
inverter case is not lit.
The power indicator
on the portable power
pack is
blinking
green.
Battery power is low.
Or, it is not installed
correctly.
Check the battery
level indicator. If
the battery level is
sufficient, check
how the battery is
installed.
Portable power pack
or power cord is hot.
Cool the portable
power pack.
The plug on the
vibrator is not
properly connected
to the socket on the
portable power pack.
Or, the cable is
disconnected.
Make sure the plug
is firmly connected to
the socket.
In case of
disconnection,
inspection and repair
are required.
The LED lamp on the inverter case is
solid r
ed.
The vibrator has
stopped because
a fault has been
detected.
Turn the portable
power pack back on.
If the LED lamp lights
up red repeatedly,
inspection and repair
are required.
The LED lamp on the inverter case is
blinking red.
The vibrator's
erroneous start
prevention function is
activated.
Turn the vibrator
Operation Switch to
OFF once and then
turn it to ON again.
SPECIFICATIONS
Model
VR001C
VR002C
VR003C
VR004C
Output
250 W
400 W
Voltage
36 V
Current
8.7 A
14.0 A
Frequency
200 Hz
Total length
1,945 mm
(76-9/16″)
3,445 mm
(135-5/8″)
1,977 mm
(77-27/32″)
3,477 mm
(136-7/8″)
Head
Diameter x Length
43 x 255 mm
(1-11/16″ x 10-1/32″)
52 x 287 mm
(2-1/16″ x 11-5/16″)
External Hose
Diameter x Length
33 x 1,500 mm
(1-5/16″ x 59-1/16″)
33 x 3,000 mm
(1-5/16″ x 118-1/8″)
33 x 1,500 mm
(1-5/16″ x 59-1/16″)
33 x 3,000 mm
(1-5/16″ x 118-1/8″)
Mass
4.8 kg
(10.6 lbs)
5.9 kg
(13.0 lbs)
5.6 kg
(12.4 lbs)
6.7 kg
(14.8 lbs)
* Mass does not include power supply equipment such as portable power pack and batteries.
1
2
3
► 1. Head Length 2. External hose length 3.Total length