![background image](http://html1.mh-extra.com/html/makita/vr001c/vr001c_instruction-manual_3978218002.webp)
2
ENGLISH
ENGLISH: Original instructions
INTENDED USE
The tool is intended for removing bubbles from concrete when casting concrete.
NOISE
The typical A-weighted noise level determined according
to EN60745:
Model: VR001C, VR002C
Sound power level (L
WA
): 98.4 dB (A)
Sound pressure level (L
pA
): 87.4 dB (A)
Uncertainty (K): 3 dB (A)
Model: VR003C, VR004C
Sound power level (L
WA
): 97.6 dB (A)
Sound pressure level (L
pA
): 86.6 dB (A)
Uncertainty (K): 3 dB (A)
NOTE:
The declared noise emission value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE:
The declared noise emission value(s) may also
be used in a preliminary assessment of exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating cycle
such as the times when the tool is switched off and
when it is running idle in addition to the trigger time).
VIBRATION
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model: VR001C, VR002C
Work mode: operation without load
Vibration emission (ah): 1.9 m/s
2
(Hose)
Vibration emission (ah): 0.7 m/s
2
(Inverter case)
Uncertainty (K): 1.5 m/s
2
Model: VR003C, VR004C
Work mode: operation without load
Vibration emission (ah): 3.1 m/s
2
(Hose)
Vibration emission (ah): 1.7 m/s
2
(Inverter case)
Uncertainty (K): 1.5 m/s
2
NOTE:
The declared vibration emission value has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE:
The declared vibration emission value may
also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating cycle
such as the times when the tool is switched off and
when it is running idle in addition to the trigger time).
EC Declaration of conformity
For European countries only
The EC declaration of conformity is included as Annex A to this instruction manual.