P 5 / 12
Fig.5
Fig.6
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Base
ASSEMBLING
(1) Assemble Base by taking reverse step of Disassembling. Refer to
Fig. 4
,
Fig. 3
,
Fig. 2
.
DISASSEMBLING
1. Do not forget to mount Spring washer 5,
when assembling on Angular plate side.
2. Bow stop ring E-12 has to be mounted as shown in
the illustration below.
So, Bow stop ring E-12 can transmit the pressure
force from M8-13 Hex nut.
[3] -2-a Armature
Spring washer 5
M5 Hex nut
(1) Take out Armature as shown in
Fig. 6
.
M5x40 Pan head
screw ( 3 pcs.)
Motor housing
complete
1. First , remove Brush holder cap and
Carbon brush. And unscrew M5x40
Pan head screw.
2. Remove Motor housing
complete.
< Note >
Be careful, not to lose Flat washer 14, and O ring 18,
when separating Motor housing.
3. Pull off Armature assembly
from Gear room of Blade case.
Armature
Brush
holder cap
Carbon brush
Carbon brush
O Ring 18
Flat washer 14
Brush
holder cap
M5 Pan
head screw
< Note >
Pay attention to the matters in
Fig. 5
, when assembling Base.
Bow stop ring E-12
M8x24 Flat
headsquare neck bolt
M8-13 Hex nut
Lever plate
