P 3 / 12
Fig. 2
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Base
DISASSEMBLING
(1) Remove saw blade in accordance with the instruction manual. First, remove M8x24 Flat headsquare
neck bolt on Depth guide side, as shown in
Fig. 2
.
M8-13 Hex nut
3. Remove M8-13 Hex nut, and then, remove Flat washer 8.
Consequently, M8x24 Flat headsquare neck bolt may fall
onto reverse side of Safety cover.
See the illustration
bellow
.
Flat washer 8
4. Remove Rubber sleeve 6, unscrewing
one M6x20 Pan head screw.
5. Now Safety cover swing toward Angular
plate side. And M8x24 Flat headsquare
neck bolt can be removed.
Now, Base section is free from the
machine on the depth guide side.
M8-13
Hex nut
M8x24 Flat
headsquare
neck bolt
Lever plate
Depth guide side
Depth guide
Angular plate side
Angular plate
1. Loosen M8-13 Hex nut, by turning Lever plate.
See the illustration below.
2. Remove Bow stop ring E-12 by turning
it with slotted head screwdriver.
See the photograph below.
Lever plate
Bow stop ring E-12
Slotted head
screwdriver
Rubber sleeve 6
M6x20 Pan head screw
Safety cover
M8x24 Flat headsquare neck bolt
may fall onto reverse side of
Safety cover.
