P 4 / 12
Fig.3
Fig.4
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Base
DISASSEMBLING
(2) Remove M5 Pan head screw on Angular plate side as shown in
Fig. 3
.
(3) Base section is removed from the machine, as shown in
Fig. 4
.
Depth guide side
Depth guide
Angular plate side
Angular plate
1. Fixing M5 Hex nut with Wrench 8,
unscrew M5 Pan head screw.
3. Now, Base section is free from the machine both on Depth guide side and Angular plate side in this step.
2. Remove M5 Pan head screw and
M5 Hex nut, while paying attention
not to lose Spring washer 5.
Wrench 8
Screwdriver
M5 Hex nut
M5 Pan head
screw
Angular plate
Blade case
M5 Pan head
screw
M5 Hex nut
Spring washer 5
Base section
