P 7 / 12
Fig. 9
Fig. 10
R
epair
[3] DISASSEMBLY/ASSEMBLY
ASSEMBLING
[3] -2-b Safety cover
DISASSEMBLING
[3] -2-c Blade case complete
Assemble Safety cover as shown in
Fig. 9
.
2. Pass the hook of Tension spring 3
through the hole of Safety cover,
by approaching from Bearing box
side.
3. Pass the another hook of Tension
spring 3 thruogh the hole of Blade
case, by approaching from the
Safety cover side.
4. Secure the Safety cover with
Retaining ring S-38.
1. Make sure, that Thickness
ring is mounted to Bearing
box section in advance.
Retaining
ring S-38
Thickness ring
(1) Make Base free from Blade case complete on Depth guide side. See
Fig. 2
.
(2) On Angular plate side, make Base free from Blade case complete. See
Fig. 3
.
So, Base can be separated from Blade case complete. See
Fig. 4
.
(3) Disassemble Safety cover as shown in
Fig. 8
. And Blade case complete can be disassembled as shown in
Fig. 10
.
1. First , remove Brush holder cap
and Carbon brush. And unscrew
M5x40 Pan head screw.
2. Disassembling Motor housing
complete, remove Armature
assembly and Shaft lock.
Pay attention, not to lose Flat
washer 14, O Ring 18 and
Compression spring 5.
3. Unscrewing M5x16 Pan head
screw, remove Bearing box
section. Now, Blade case
complete can be replaced.
M5x40 Pan head
screw ( 3 pcs.)
Carbon
brush
Carbon brush
Shaft lock
Compression spring 5
Brush
holder cap
Flat washer 14
O Ring 18
M5x16 Pan head
screw ( 2 pcs.)
Bearing box
Armature
assembly
