ASSEMBLING
Fig. 13
(1) Assemble Motor housing to Gear housing.
(2) Insert Change lever into the position where it was when removed (
Fig. 13)
.
Note
: Change lever is not completely fit into Motor housing at this time (
Fig. 12
).
(3) While pushing Lock button deeply into the inner bottom of Change lever, tap Change lever with a plastic
hammer to fit the hinge portion of Change lever into Motor housing completely.
(4) Make sure to check if Change lever is smoothly set to Hammer drill mode and Drill mode after assembling.
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Change Lever (cont.)
R
epair for 2 mode Rotary hammers HR2230, HR2460 and HR2460F
P
5
/
15
Fig. 14