![background image](http://html1.mh-extra.com/html/makita/hr2230/hr2230_technical-information_4169934010.webp)
[3] DISASSEMBLY/ASSEMBLY
[3] -6. Impact Bolt Section (cont.)
DISASSEMBLING
ASSEMBLING
Ring spring 28
Remove Impact bolt section
by striking Tool holder complete
against workbench.
Note: Ring spring 28 has damaged.
Therefore, be sure to replace the damaged
Ring spring 28 by new one when assembling
Tool holder section.
Fig. 33
Fig. 34
Fig. 35
Fig. 36
Fig. 37
Tool holder
complete
Tool holder complete
Sleeve 9
Impact bolt
Ring 10
Cushion ring 13
(1) Assemble the Impact bolt section to Tool holder complete as illustrated in
Figs. 35, 36 and 37.
O ring case
O ring 9
Impact Bolt Section
(3) Pick up Ring spring 28 from Tool holder complete (
Fig. 33)
and take off the Parts of Impact bolt section. (
Fig. 34
)
O ring 9
O ring 9
O ring case
Put O ring 9 in O ring case.
Ring 10
Sleeve 9
Impact bolt
O ring case
Cushion ring 13
20mm
15.5mm
Put the long side of Impact bolt into Sleeve 9
Impact bolt
Note: Impact bolt is not reversible.
R
epair for 2 mode Rotary hammers HR2230, HR2460 and HR2460F
P 1
0
/
15