13 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
DCU601
Dimensions (L x W x H) *1
1,400 mm x 730 mm x 820 - 1,030 mm
Traveling speed
Forward
5.0 / 3.5 / 1.5 km/h
Reverse
1.0 km/h
Maximum load capacity
On flat ground
300 kg
On slope (3 ° - 12 °)
180 kg
Maximum climbing capacity
12°
Minimum turning radius *2
1,150 mm
Brake
Hand brake and support brake
Tire
Front wheel
Pneumatic tire
Rear wheel
Pneumatic tire
Rated voltage
D.C. 36 V
Net weight
144 - 145 kg
Protection degree
IPX4
*1. The maximum height when the carrier is lifted is 1,020 mm, requiring a space of 1,260 mm above the machine.
*2. Outer diameter when turning with front wheel as axis.
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
Charger
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH / DC18WC
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
WARNING:
Never use Portable Power Pack PDC1200 or PDC01 with this product.
Using them together
may cause personal injury or malfunction.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Do not change direction on slopes.
This machine cannot be used on
public roads.
Do not load or unload objects on
slopes.
Do not use the machine for trans-
porting people.
Do not lift the carrier on slopes.
Load objects on the carrier evenly.
Do not load objects unevenly or only
on front side.
Summary of Contents for DCU601
