[4] DISASSEMBLY/ASSEMBLY
[4]-8 Trigger base section (cont.)
ASSEMBLING
Torsion spring 6
wide hook
Torsion spring 6
Torsion spring 6
Hitch Stopper plate with the narrow
hook of Torsion spring 6.
Hitch Lever (for single firing)
with the wide Hook of Torsion
spring 6.
(2) Set Torsion spring 6 to Lever (for single firing), or to Stopper plate.
Aligning the half moon section of Stopper plate to that of Lever (for single firing), put Torsion spring 6
between Stopper plate and Lever (for single firing). Set Torsion spring 5 to Stopper plate as illustrated in
Fig. 24
.
(3) Assemble Stopper plate, Lever (for single firing) and Torsion springs as illustrated in
Fig. 24-S
.
Stopper plate
Torsion spring 5
Torsion spring 5
Lever for single firing
Torsion spring 5
Put the one of tail of
Torsion spring 5 on the
boss of Stopper plate.
Lever (for
Single firing)
Stopper plate
Face the wide hook side to Lever (for single firing).
And assemble the Torsion spring 6 as illustrated in
Fig. 24-S.
narrow hook
Lever (for
Single firing)
Fig. 24-S
Fig. 24
Lever (for single firing)
Setting Lever (for single firing) together with Stopper plate to
Trigger base, pass Pin 3 through them.
Lever (for single firing) has to be set
under Trip lever as illustrated below.
Trip lever
Trigger
Fig. 25
Trigger base
Trigger base
Pin 3
Lever (for single firing)
Stopper plate
Fix Torsion spring 5 by
hitching the other Tail
(the opposite of the tail
shown in Fig. 24-S) to
the pin of Trigger base.
the other Tail of
Torsion spring 5
(4) Mount the assembled parts shown in Fig. 24 to Trigger base as illustrated in
Fig. 25
.
(5) Referring to the
center
and
the
left
illustration
in Fig. 17
, assemble Trigger base section to Housing set.
P 13/ 16
R
epair