[4] DISASSEMBLY/ASSEMBLY
[4]-9 Adjuster assembly
DISASSEMBLING
ASSEMBLING
(1) Disassemble Adjuster assembly together with Trigger base section as the left and center illustrations in Fig. 17
(2) Separate Adjuster assembly from Trigger base section as illustrated in Fig. 26.
(3) Disassemble the Adjuster assembly as illustrated in Figs. 27 and 28.
1R266
Spring pin 2-14
Adjuster shaft
Steel ball 2.3
Compression
spring 2
Compression
spring 6
Compression
Spring 6
Slide plate
1R032
Fig. 26
Fig. 27
Adjuster
Assembly
Trigger
Base section
Align Adjuster piece to the side window
of Upper yoke by turning it by 90 degrees.
Remove Adjuster piece.
Slide plate can be removed from Upper yoke.
Adjuster piece
Adjuster piece
Upper yoke
Fig. 28
Remove Adjuster shaft by turning carefully so as not to lose
Steel ball 2.3 and Compression spring 2.
90
degrees
(1) Assemble Adjuster piece to Contact arm by inserting its boss into Slide plate in Upper yoke. Refer to Fig. 28.
(2) Turn Adjuster piece in Upper yoke by 90 degrees so that Adjuster shaft can be driven to Adjuster piece.
Refer to Fig. 28.
(3) Assemble Compression spring 2 and Steel ball 2.3 to Upper yoke. Drive Adjuster shaft into Adjuster piece carefully
so as not to lose Steel ball 2.3 and Compression spring 2. Refer to the right illustration in Fig. 27.
(4) Assemble Spring pin 2-14. Refer to the left illustration in Fig. 27.
P 14/ 16
R
epair
