[4] DISASSEMBLY/ASSEMBLY
[4]-4. Magazine (cont.)
ASSEMBLING
Rubber
plate 6-20
Tension
spring 5
Holder cap
(1) Assemble Magazine as illustrated in
Fig. 13
.
(2) Mount Magazine to the Machine, referring to
Fig. 10
.
Press Change plate until it
is attached the bottom of
Magazine.
Insert Rubber plate 6-20 into Tension
spring 5. Then assemble Top cap to
Tension spring 5.
Put Holder cap to Change plate while
passing Tension spring 5 through the
center hole of Change plate.
Pull out the Tension spring 5 from
the bottom side of Magazine.
Connect Holder cap with the
hook of Tension spring 5.
Change plate
Holder cap
Holder cap
M4x8 Pan head screw
Assemble Magazine guard
to Magazine.
Magazine guard
Magazine
Fig. 13
P 7/ 16
R
epair
