[4] DISASSEMBLY/ASSEMBLY
[4]-7 Front cushion, Trigger valve (cont.)
ASSEMBLING
Take the disassembling step in reverse.
Refer to
Figs. 18 and 17
.
Trigger valve
guide
Note:
1) When assembling Trigger valve guide to Trigger valve case, press Trigger valve guide to Trigger valve case
until it snaps. (
Fig. 19
)
2) Fitting Lever to the groove of center of Change rod, assemble Trigger base section. (
Fig. 20
)
3) Pay attention to the assemble position of Spring pins 3-20 and 3-32. Refer to
the left illustration in Fig. 17
.
4) Use 1R268 as a guide jig for easy and exact assembly of Spring pins. (
Fig. 21
)
Fig. 19
Fig. 20
Fig. 21
Trigger
valve case
Trigger base
section
Change rod
Lever
Spring pin
1R268
(as a guide jig)
In order to use 1R268 as a guide jig,
insert it to Housing set.
And fit Spring pin’s hole to the protrusion
of 1R268.
Strike Spring pin until !R268
is pushed out from Housing set.
1R268
(as a guide jig)
Spring pin
P 11/ 16
R
epair
