[4] DISASSEMBLY/ASSEMBLY
[4]-3. Driver complete, Cylinder section (cont.)
ASSEMBLING
(2) Mount O rings to Cylinder and Driver complete. Refer to Fig. 8.
(3) Assemble the Cylinder section to Housing set. Refer to the right illustration in Fig. 6.
(4) Insert Driver complete into the Cylinder. Refer to the right illustration in Fig. 6..
(5) Assemble O ring 5 to Housing set. Refer to the left illustration in Fig. 6.
(6) Assemble the Head valve section to Housing set. Refer to Fig. 3.
[4]-4. Magazine
DISASSEMBLING
Magazine guard
Magazine guard
Change plate
Change plate
Magazine
M5x25 Hex socket head bolt (2pcs.)
Refer to Figs. 10 to 12.
Remove Magazine and Single guide
from the machine by removing
M5x25 Hex socket head bolt (2pcs.).
Remove Magazine guard
by removing M4x8 Pan
head screw.
Press Change plate until it is attached on the bottom of Magazine.
Single guide
M4x8 Pan head screw
Magazine
Magazine
Magazine
Holder cap
Holder cap
awl
Insert awl into the notch on the bottom
of Magazine and lever up Holder cap.
Pick up Holder cap by finger, then remove
the hook of Tension spring 5 from the
hole on the reverse side of Holder cap
using awl.
Fig. 10
Fig. 11
Fig. 12
Tension spring 5
Holder cap (on change plate)
Tension spring 5
Rubber plate 6-20
Holder cap (on the bottom
of Magazine)
Magazine section can be
disassembled as illustrated right.
P 6/ 16
R
epair
notch on the bottom of Magazine
