background image

New Product 

Switch Mode Power Supply 

S8VS 

(15/30/60/90/120/180/240/480-W Models) 

60/90/120/180/240/480-W Models 

New Models with Indication 
Monitor and Simple Functions 
for Easy System 
Commissioning 

• New 90-W models with indication monitor that 

conform to UL Class 2 Output standards. 

• New models with screwless terminal blocks

and indication monitor.

• Status displayed on 3-digit, 7-segment display. 

• Safety standards: 

UL508/60950-1, 

CSA C22.2 No. 14/60950-1 

(15-W and 30-W models), 

CSA C22.2 No. 107.1/60950-1 

(60-W to 240-W and 480-W models), 

EN 50178 (= VDE0160) 

• Input conditions: DC input is also possible from 80 to 370 VDC (BE models only, not compliant with EC Directives 

and other safety standards). 

15/30-W Models 

Compact, Thin Power Supplies 
That Mount Just About Anywhere 
to Contribute to Control Panel 
Downsizing 

• Compact and thin: 22.5 

×

 85 

×

 96.5 mm (W 

×

 H 

×

 D). 

• Three mounting directions

(standard, horizontal, facing horizontal).

• Mounting directly to the panel is possible. 

• Safety standards: 

UL508/60950-1/1604, cUL: CSA C22.2 No. 14/60950-1/213, 

EN50178 (= VDE0160). 

Features Common to All Models 

• Mount to DIN Rail. 

• Complies with SEMI F47-0706 (200-VAC input). 

• RoHS-compliant. 

Refer to Safety Precautions for All Power Supplies and Safety 
Precautions
 on page 31. 

Summary of Contents for S8VS 120-W





































Reviews: