10
TRANSPORT & MOVING
Check the local Highway Code regulations before driving the tractor on public highways with a towed implement
Check the reflectors, hazard flashers and/or projecting load indicators are installed when required and efficient.
These indicators must be installed correctly and easily seen by the drivers of other vehicles.
!
WARNING
Bystanders must not be allowed to lean against or climb onto the machine during
transport or while working. Do not allow bystanders to ride on the machine.
TRANSPORT POSITION
Check machine is hitched to the tractor as described. Ensure the tractor parking brake is applied
Lift the body clear from the ground by activating the axle hydraulic ram
Transform the machine into transport position by hydraulic control. The Drawbar ram should be full
closed. On the 1200T model, continue to hold the spool in this position & the wing will lift up into a
vertical position.
Lock the wing into transport position & retain pin with clip (1200T model only)
Adjust the axle height stopper to the highest position.
Operate the tractor hydraulics to pull in the wing ram
1200T TRANSPORT LOCKING BAR LOCATIONS
!
WARNING
Maximum transport speed for the implement is 30km/h.
Summary of Contents for TURF MAJOR 800T
