Major TURF MAJOR 800T, Operator'S Manual / Parts Book

Page: 14 / 33

13
MAINTENANCE SCHEDULE
Grease the following:
Initially 8 Hours
1 PTO Shaft yoke ends (8)
2 Drawbar drive Bearings (12)
3 Drawbar pivot (1)
4 Axle Pivot (2)
1200T only
5 Wing Pivots (2)
6 Wing Axle (2)
All nuts and bolts in the transmission including Rubber Couplings, Star Drives, PTO Shafts, Gearboxes & wheel
nuts should be checked for tightness after mowing at the following intervals:

1
st
50 acres,

1
st
100 acres

1
st
250 acres,

And every 250 acres thereafter. Lubricate moveable mechanical joints when required.
!
IMPORTANT
Ensure blade rotation and timing is correct after servicing transmission
SHEAR BOLT REPLACEMENT
Slide yoke shield back.
Drive out sheared bolt with hammer and punch.
Align holes and install new shear bolt.
Use only genuine MAJOR replacement shear bolts.
M10X60 BZP -8.8
Slide yoke shield securely in place
I
MPORTANT
Fit PTO shaft with the shearbolt end connected to the
Topper as directed on the PTO guarding