Operation Manual touchTymp MI 26 and MI 36 Version
8511780 Rev. 4
34
30/06/2021
Tool Bar:
A row of icons that activate key functions when selected. Some buttons in
the toolbar will be ghosted when not useable. These buttons will change based on test
or setting screen visible.
The available icons for the
Tool Bar
include (Table 9):
Table 9 Icons in the Tool Bar
ICON
FUNCTION EXPLANATION
Te
s
t Sc
re
e
n
Delete
Delete
: to delete the stored measurements. Select the
button and a message box will appear to confirm which test
modules to delete or select all.
Edit
Edit:
to edit reflex results. Select the button to enter the edit
reflex screen.
Transfer to
PC
Transfer to PC:
to transfer the currently measured data.
Dependent on the measurement (right, left or both ears) all
data of the measurement completed will be transferred.
Only the test results of the currently selected probe tone will
be transferred.
Print:
to print the results of all completed tests and of all
probe tones.
Selection of
ears
Ear:
to select an ear for testing or repeating the measurement
on the same ear (Blue = Left Ear, Red = Right Ear).
NOTE:
The ear can be selected in different ways. Use the
ear buttons on the screen or the
Probe
button to change
the ear. Also, you can touch the left or right diagram.
Start /
Stop /
Pause
Start
,
Stop
,
Pause
: to start, stop or pause a measurement.
Icon will show only when applicable to the test method.
S
e
tt
ing
s
c
re
e
n
Default
Default:
to set the device back to factory settings.
Save
Save:
to save current selection.
NOTE
: An active button is displayed in blue.
Main Screen Display:
The middle or blue section displays the test configuration and
results when in the test mode. For a detailed explanation of the different test screens
see section 5.4.4.
Summary of Contents for touchTymp MI 26
Page 1: ...Operation Manual touchTymp MI 26 and MI 36 Version...
Page 2: ......
