Fault
Cause
Remedy
The grinder is
humming but
not grinding.
• The
grinding
mechanism is
clogged.
Release the lock on the grind adjust-
ment and set the grinding degree to
“8”.
Start the grinding process.
The grinder clears itself.
Then set the grind adjustment to the
se ng required during opera on.
• Ground
co
ff
ee
has built up
in the grinder
because of too
much co
ff
ee in
the porta
fi
lter.
Clean the spout system
(see chapter “Cleaning the spout sys-
tem”).
Release the lock on the grind adjust-
ment and set the grinding degree to
“8”.
Start the grinding process.
The grinder clears itself.
Then set the grind adjustment to the
se ng required during opera on.
• The
grinding
degree is too
fi
ne.
Release the lock on the grind adjust-
ment and set the grinding degree to
“8”.
Start the grinding process.
The grinder clears itself.
Then set the grind adjustment to the
se ng required during opera on.
• A
foreign
object is in
the grinding
mechanism.
Clean the grinding mechanism as
described in the “Cleaning” sec on
and remove the foreign object as you
do so. If the foreign object cannot be
removed, contact your service partner
(see the sec on “Maintenance and
service”).
The grinder is
not grinding;
the display is
permanently
red.
• The grinder is
not measuring.
Calibra on of the weighing scales is
required (see “Calibra ng the weighing
scale”).
41
E65S GbW | EN
Summary of Contents for E65S GbW
