Fault
Cause
Remedy
The grinder’s
dispensing
accuracy is
decreasing.
• The
envi-
ronmental
condi ons
have changed,
e.g. where
the grinder is
located.
Calibra on of the scales is required (see
“Calibra ng the scales”).
• The
calibra on
interval has
been exceed-
ed.
Calibra on of the scales is required (see
“Calibra ng the scales”).
• The spout is
clogged.
Too much
ground co
ff
ee
has been de-
posited in solid
form inside
the grinder.
Remove the spout or clean the spout
from the outside with a brush with the
grinder switched o
ff
.
Release the lock on the grind adjust-
ment and set the grinding
degree to “8”.
Start the grinding process.
The grinder clears itself.
Then set the grind adjustment to the
se ng required during opera on.
• The
grinder
spout is dam-
aged.
Contact your service partner
(see the sec on “Maintenance and
service”).
• The
fl
apper is
dirty.
Clean the
fl
apper (see “Cleaning the
fl
apper”).
• The
fl
apper is
faulty.
Change the
fl
apper (see “Changing the
fl
apper”).
The bean
hopper
cannot be
a ached.
• There
are
beans in the
bean hopper
intake.
Remove the beans from the bean hop-
per intake.
• The
rubber
ring is not
lying
fl
at in the
bean hopper
intake
.
Ensure that the rubber ring is correctly
in place and is lying
fl
at in the bean
hopper intake.
43
E65S GbW | EN
Summary of Contents for E65S GbW
