Mahlkonig E65S GbW, Instruction Manual

Page: 24 / 48

• Reduce the grinding degree only while the grinder is in
opera on.
• In order to prevent/eliminate any imbalances in the grinding
degree se ng, it is advisable fi rst to set a coarser grinding
degree (about one step/unit above the grinding degree re-
quired) and then move the grinding degree slider from there
down to the
fi ner grinding degree required.
3. If necessary, fi x the grind adjustment by turning the grinding degree lock
clockwise to the (closed) posi on (see Fig. F ).
Selec Ɵ ng recipes based on weight/ Ɵ me
– Turn the controller (3) to select the desired recipe (see Fig. G ).
The symbol of the selected recipe and the corresponding grinding weight
or grinding me are highlighted on the display
(14) .
Assigning recipes based on weight/ Ɵ me
You can use the weight-based and me-based parameters to
de
fi ne the desired grinding mode, which is then automa cally
carried out by the grinder.
1. Press the controller (3) 2 mes to call up the main menu on the display
(14) .
2. Turn the controller to select the “Edit recipes” menu item and con fi rm
your selec on by pressing the controller.
3. Turn the controller to select an exis ng recipe and con fi rm your selec on
by pressing the controller.
4. In the recipe, select the fi rst menu item - “Time-based/weight-based/
manual” - and con fi rm your selec on by pressing the controller.
5. In the submenu, select the desired grinding mode ( me-based/weight-
based/manual) and con fi rm the recipe se ng by pressing the controller.
Se ƫ ng or changing the grinding weight/ Ɵ me
Proceed as follows if you would like to change the grinding weight / grinding
me of a new recipe or if you want to change that of an exis ng recipe:
1. Select the desired recipe by turning the controller (3) (see the “Selec ng
recipes based on weight/ me” chapter).
2. Press the lower bu on (22) .
ESPRESSO GRINDER
24