Mahlkonig E65S GbW, Instruction Manual

Page: 22 / 48

Opera Ɵ on
NOTE!
Danger of overhea Ɵ ng!
Exceeding the maximum permissible opera ng cycle can cause the
grinder to overheat.
– Do not exceed the maximum opera ng cycle
(see the sec on “Technical data”).
– Observe the recommended pause when the maximum permissi-
ble opera ng cycle is reached (see the sec on
“
Technical data
”
).
• The grinder has a thermal overcurrent circuit-breaker which
interrupts the electric circuit of the grinder in case of electri-
cal overload.
To put the grinder into opera on again, set the on/o
ff switch
(5) to switch posi on 0 (o ff ).
Then press the release bu on (6) .
You can switch the grinder back on by se ng the on/o ff
switch to switch posi on I and pu ng the grinder into opera-
on (see chapter “Troubleshoo ng”).
• The grinder also has a motor protector, which switches o ff
the grinder when the motor becomes too hot.
As soon as the motor has cooled down, the grinder can be
operated again (see the sec on “Troubleshoo ng”).
NOTE!
Risk of damage!
The operator has no in fl uence on the thermal overcurrent cicuit-breaker.
If the thermal circuit-breaker has been triggered several mes, an
authorised service partner must be contacted for advice as the motor
winding can become damaged.
ESPRESSO GRINDER
22