Mahlkonig E65S GbW, Instruction Manual

Page: 36 / 48

11. Turn the fi x burr fl ange an clockwise and ghten the three locking
screws using a fl at-head screwdriver.
12. Place the grinder lid onto the grinder, turn the bean hopper intake clock-
wise as far as it will go and ghten the locking screws.
13. Make sure that the rubber ring has been properly posi oned in the bean
hopper intake and is lying fl at.
14. Place the bean hopper onto the grinder (see chapter “Cleaning the bean
hopper” steps 7
–
13).
Cleaning the fl apper
The fl apper should be cleaned every 2–5 days.
1. Remove the grinder lid (27) , proceed as described in chapter “Cleaning
the grinding mechanism manually” steps 1
–
5.
2. Remove the fl apper (35) from the recess in the grinder.
3. Clean the fl apper with lukewarm water and then dry it.
4. Replace the fl apper into the recess in the grinder.
5. Place the grinder lid onto the grinder; proceed as described in chapter
“Cleaning the grinding mechanism manually” steps 12
–
14.
ESPRESSO GRINDER
36