MAHLE RemotePRO, User Manual

Page: 34 / 37

RemotePRO
User Manual
36
Ethernet cable has been disconnected
Screen displayed on RemotePRO if the Ethernet
cable is disconnected from the device while it is still
powered by the vehicle. If the cable has not been
disconnected, check the cable for damage. When
the Ethernet cable is connected, a click should be
heard
Device reboot!
Screen displayed on RemotePRO in case of con-
nection loss. Reboot the device
Session completed
Screen displayed on RemotePRO once a scanning
session is completed. Once this screen appears,
you can disconnect RemotePRO from the vehicle
Note: Legacy Screen - currently not in use
H3 SN: 21585 v2.05
E: 006035 38-4A-8D 1
W: 006035 38-4A-8E 1
Show MAC address on RemotePRO
Screen displayed on RemotePRO after the user
presses the NO button 3 times. Shows MAC
address for both Ethernet and Wi-Fi
Note: E = Ethernet and W = Wi-Fi